|
 Kinetics®
Floating Wood Floors
Kinetics®
Floating Concrete Floors
Kinetics®
Liftslab Floating Floor
Model LSM Kinetics®
Spring Liftslab Floating Floors
Kinetics®
Sound Rated Floors
Kinetics®
Liftslab Floating Floor
Model FLM - Floor Lift Mount for Floated Floors
 |
The Kinetics® Model
FLM Liftslab Floating Floor System is primarily specified for
areas with regular perimeter contours, and light to moderate
or uniform imposed loading (50 to 75 PSF).The system uses Model
FLM Isolation Mounts which are placed up to 4' on center each
way on top of bond breaker polyethylene which has been laid on
the structural floor. Reinforcing bars are then installed across
rows of isolators and the concrete is poured. After curing the
slab is raised to operating height using built-in jack screws.
The Model FLM Isolation Mount
consists of a cast housing with a 2 inch thick high density precompressed
fiber glass or neoprene isolation pad, leveling screw, and support
lugs for attachment to the reinforcing bars.
|
Model
LSM Kinetics® Spring Liftslab Floating Floors
For Structureborne
Vibration & Impact Isolation
Spring Liftslab Floating Floors are typically used where control
of low frequency vibrations, impact, and structureborne noise
is critical. Standard systems are available with up to 2"
deflection springs. Custom systems with higher deflection springs
and vents to decrease the stiffness of the en trapped air between
the floating and structural slab are also available. Kinetics®
Model LSM Spring Liftslab Floating Floors are used where vibration
from equipment, traffic, or transit systems is problematic. Heavy
impact noise from fitness/sports activities or other structureborne
vibration is also attenuated using LSM isolators.
|
floating floors for mechanical rooms, studios,
impact isolation